Downspout Roll Forming Machine with 16 Stations and 12m/min Rolling Speed

Downspout Roll Forming Machine with 16 Stations and 12m/min Rolling Speed

Quick Detail:

Rolling stations: 16

Motor power: 3 KW

Rolling speed: about 12m/min

Specifications:

Cut off with saw pneumatically

Forming roller; 45#steel with chrome

Control system: PLC (Mitsubishi)

Outer size: 0.7m*0.7m*0.8m

Technological process of downpipe roll forming machine:
Uncoiling---Feeding---Leveling---Punching----Roll forming---Cutting---Products collecting

More Machines Pic

Downspout (Down pipe) is a pipe for conveying rain water from a roof or gutter to the ground, also referred to as Leaderpipe, Downpipe, or Drainspout. The downspouts are more and more widely applied in rain water storage solution. Downspout disconnection (sometimes called roof leader disconnection) represents a cost-effective on-site alternative for reducing the volume and cost of stormwater that requires public management. Runoff from residential rooftops is collected by eaves troughs, which are installed along the edge of the roofline. Water collected in the eaves trough is conveyed to ground level by one or more downspouts. Downspouts may then connect directly into the storm sewer system into a combined storm and sanitary sewer system. Disconnecting downspouts brings a number of economic and environmental benefits to the municipality and the homeowner

Our roll forming line of downspout machines run copper, steel, or aluminum. These are also ideal for piping for the HVAC industry for small sizes ductwork.

down pipe forming equipment

round downpipe roll forming machine

Downspout Roll Forming Machine with 16 Stations and 12m/min Rolling Speed Images