3"X4" Size Square Down Pipe Roll Forming Machinery Suitable 0.5-0.8mm Thickness Color Steel/Aluminum
Technical parameter
Coil material: Aluminum, cooper, color steel
Rolling Thickness:0.5-0.8mm
Forming station:19
Forming speed: 12m/min
Main Motor Power:7.5kw, 380v,3phase, 50Hz
Axle Diameter:70mm
Rolling Material:45# Steel, chromed and coating 0.05mm
(1) Un-coiler
manual de-coiler; Max. Capacity: 5T
Suit for coil inner diameter: 508mm, suitable coil Max. out diameter: 1000mm
Manual power expands the coil inner surface.
(2) Roll forming machine
| Description |
| Product Name | Downpipe Roll Forming Machine |
| Machine Size | 6000mm*800mm*1200mm |
| Machine Weight | About 4 T |
| Frame Materials | 350H section steel |
| Middle plate thickness | 12mm |
| Forming Shaft | Diameter | 70mm |
| Material | 45# quenched and tempered material |
| Forming roller | 45# Forging Hard Chrome Plating |
| Drive mode | 1 inch sprocket, chain |
| Forming Station | 18 stations |
| Forming Speed | 8-12m/min |
| Pressing Thickness | 0.5-0.8mm |
| Pressing width | ≤400mm |
| Main Engine Power | 7.5KW with cycloidal reducer |
| Pump Station Motor | 3KW |
| Computer | Taiwan “Delta” |
| Coder | Wuxi "rip" or "Xin Ya" |
| Switch | " CHINT "or" delixi" |
(3) Hydraulic Cutting
1) Adopts post cutting, Stop to cut;
2) The cutting blade material is Cr12 with quenched treatment.
3) Adopts welded frame for good rigidity.
4) Cutting frame has been heat treatment to avoid final product deformation. cutting length tolerance ±2mm.
5) The power of cutting is provided by hydraulic station.
6) The final product can be cut as per set length in PLC controller, and the length is automatically measured by encoder. When final product reaches the set length, machine will stop to cut the Product automatically. Finish this action, machine will run again continuously.
(4) Hydraulic station
1) It supplies the power for the hydraulic cutter.
2) All hydraulic accessories are all use Chinese famous brand products.
4) Hydraulic motor power: 3KW
(5) PLC Control System
1) This system uses Delta PLC to control the all working actions. Production quantity and each piece length will be automatically measured. It is convenient to control the roll forming machine.
2) Delta converter adjusts speed technology, realize the automatic production.
3) Text screen is input and cancelled the working data.
4) Friendly man-machine interface system can be set batches to the work piece, length, quantity, etc.
5) Encoder count, having function of count and measuring length.
6) Suitable power voltage: 380V/50HZ/3Phase (can de designed according to buyer’s requirement)
(6) Product Rack (un-powered)
1) They are used to put the final product when product coming out from cutting device.
2) Two pieces, each piece length is 1m, total length is 3 meters.
3) Collect the final product and final products are convenient to be stacked by workers.
Auliary equipment:
Working flow:
Passive decoiler---- feeding & guiding---- roll forming--- straightening-- hydraulic cutting---run out table
Application
downspout, rainspout,Rainwater downpipe, drainpipe, water pipe
Product Tags:
|
|
3"X4" Size Square Down Pipe Roll Forming Machinery Images
|
